Best Wood Chippers for Home Use 2024

(Last Updated On: November 24, 2023)

Wood chipper is a machine that cut, shred, chops, or mulches the plant debris, branches, and limbs. Although these chipping functions are important for many manufacturing processes, we will discuss the importance of wood chippers in homes. Shredders can shred organic matter like leaves, grass, or shrubs while the chipper cuts the wooden parts of the debris into small chips. We have compiled some of the best wood chippers for home use in the article. We suggest you have a look at them.

People having gardens or backyards with large trees and shrubs will agree that cleaning and maintenance of the garden or backyard can leave us with a lot of waste to get rid of.

Putting this waste into the outdoor bins is not a solution. Wood chippers are very helpful in this regard, they chip, shred, or mulch the garden debris and make the disposition very convenient for us. But there are some machines specially designed for chipping and shredding.

We have already said that wood chippers are chipping, shredding, and mulching machines but we are going to illuminate the topic at hand. There are three basic kinds of chipping machines that work on different power sources including electricity, gas, and PTO. The electric wood chippers are easier and quieter as compared to the gas and PTO-powered chippers.

Their material diameter capacity is no more than 2inches but if you are using the chipping machine only for backyard cleaning, electric chippers can do the trick. They are cost-effective, lightweight, and convenient to use.

All you need to do is plug the chipper into your household outlet and it is ready to work. Gas-powered chippers are more commonly used in residential areas, they are much louder and expensive than cheap electric chipping machines.

They can process wood pieces of 3inches and they also do not need to be located near the power sources like electric ones. A power take-off or PTO chippers draw power from the vehicle they are mounted on.

These chippers are normally attached to trucks or other compatible vehicles and their working efficiency is much greater than the gas and electric ones. The cost is also higher along with the material diameter capacity.

Three different types of chippers are devised based on the chipping technology used in them. Disc chippers use a steel disc on which sharp blades are attached for chipping action. The reversible hydraulic shaft in them pulls and pushes the material in the wood chipper and out of it.

Disc chippers normally have a steel disc with sharp blades mounted on it with hydraulically powered reversible wheels to pull the input into the disc. Commercial and industrial grade disc chippers have different material diameter capacities for chopping wood. Drum wood chippers use motor-powered drums and they have blades on them.

Conventional feed shredders use these drums for the feed mechanism, the drums pull the material fed by the workers and immediately reach high speed and start the shredding process. These chippers are extremely dangerous because if an operator gets stuck on the feed material, serious injury or death can occur.

Larger chippers like whole tree chippers and recyclers can use a drum or disc mechanism or both, but the larger of these are often referred to as a tub chipper and uses hammers to pulverize the wood at the bottom instead of cutting it.

Regular maintenance is also very necessary for the uninterrupted and efficient functionality of the wood chippers. General upkeep may involve greasing of moving parts at regular intervals, replacement of blades if necessary, replacement of air filter and oil filter, changing the oil and spark plug in the machine, and much more.

Industrial chippers are powerful machines that can cause serious injuries if the operator is not being careful while handling the machine. Do not force in additional tree debris that the machine can process at a time because it will not expedite the work, and the high-speed blade can throw out the excess input material, potentially injuring the operator. Always check that there are not any stones, rocks, metal, and stuff like that within the tree debris you are feeding into the chipper.

It may ricochet off the blades and hit the operator. Be very careful about putting your hands near the inlet of the chipper’s hopper or use a long branch, if necessary, to push the material in. Wear protective gear when working with a chipper, keeping your hands, eyes, and head safe, also do not wear baggy clothes that could get sucked into the machine.

Most of the things have been explained about the chippers in the above paragraphs, now we are moving to important features to find in a perfect chipping machine.

1- Engine displacement: The cylinder volume of a chipper’s engine indicates the engine displacement. The bigger the engine is, the greater its power will be. Or you can say that the greater engine displacement is, the higher its capability will be. Generally, the engine power is measured in cc (or cubic centimeter).

2- Self-feeding mechanisms: These mechanisms allow the users to only direct the branches or limbs into the mouth of the wood chipper and the self-feeding mechanism will pull the debris to blades for chipping. It makes the chipping process very convenient and safe for operators.

3- Reduction ratio: This ratio reveals the final amount of product. Like for home use, users will go for a 10:1 reduction ratio chipping machine and it means that 10 containers of debris will be reduced to 1 container.

4- Construction material: The construction material of a machine contributes greatly to its workability. If the material is heavy and the durability also gets better. 10 to 16-gauge steel is most recommended in this regard.

5- Towable or track: Towable chippers are mobile and can be moved conveniently, while the track movement is also beneficial if one needs to clear a large area.

Best Wood Chippers for Home Use (Comparison)

Name Dimensions Weight
SuperHandy 20.5 x 20.5 x 20.5 inches 55 Pounds

Check Price

Sun Joe CJ602E-RED 19.7 x 17.3 x 37.8 inches 26.2 Pounds Check Price
Sun Joe CJ603E 15 8 x 15 x 31 inches 38.6 Pounds Check Price
Landworks Wood Chipper 29.5 x 25.7 x 40.6 inches 129.7 Pounds Check Price

 

SuperHandy Leaf Mulcher Shredder Electric

SuperHandy Leaf Mulcher Shredder Electric

SuperHandy has manufactured this leaf mulcher and shredder that is electrically powered. It is recommended for green recycling and waste management for home users and durable heavy-duty steel is used as the shredder’s construction material.

A feeding upper port is devised in this machine as an inlet for input material and its material diameter capacity is up to 0.5inch.

A very powerful 15-AMP 1800Watt 120VAC 60Hz electric belt is installed to drive the electric motor and provide a consistent speed to three 11inch blades for gyrating at 4100RPMs.

The electric shredding\mulching machines are better than gasoline-powered machines because they are less noisy and no smoke is produced making them eco and user-friendly.

The motor inside the machine is firmly protected by a sturdy powder-coated steel frame and it is supported by steel housing around the shredder.

The leaf mulcher is equipped with an instant start switch and a heavy-duty protection switch and two 6inch wheels are also added for easy mobility.

Safe and proper use is always advantageous for long and effective use of a gadget, a user manual is also added into the machine package. Furthermore, the mulcher is manufactured to the listed approved standard and is certified for its best workability.

This leaf mulcher is best suited for outdoor environments and distant use extensions can be used. Best extensions for good working are instructed in the user guide and also, always use a GFCI power inlet for this wood chipper and mulcher.

Pros Cons
0.5inch mulching ability Not suitable for large material disposition
Firmly protected motor with three blades for better working
Ideal for home use

Conclusion:

Durable heavy-duty steel body with 0.5inch material mulching capacity, this leaf shredder produces no smoke and very low-noise. A firmly protected motor supports the blade gyrating of 4100RPMs.

The user manual gives direction for safe and effective use of the machine for forestry, green recycling, and waste management. Three blades are also devised for better mulching and shredding working.

 

 

Sun Joe CJ602E-RED 15 Amp Electric Wood Chipper/Shredder

Sun Joe CJ602E-RED 15 Amp Electric Wood Chipper/Shredder

Snow joe is the manufacturer of this electric wood chipper and shredder, the blade revolutions per minute are up to 4300RPMs and it can rapidly turn your garden debris into nutrient-rich mulch and one can use, reduce or recycle it.

The powerful motor of CJ602E wood chipper\shredder is supported by a 15amp current from a normal power inlet in-house.

The amazing chipping and shredding machine is devised for low duty chipping and shredding and it can process wood sticks and organic material of 1.5inch diameter. The reduction ability is very high, reducing the waste to 1\17th of its original size.

The mulched material produced by this machine can be utilized around trees and flower beds to nourish them. It is virtually a maintenance and installation-free gadget and it is ready to use right after you get it out of its packing.

No need for any preparations for its working, just plug it in and it is ready to go when you are. Costly tune-ups and unpredictable starters are now out of the question with our amazing chipping machine and unlike the gas-powered chipping\shredding machines, there is no fumes, smoke, and annoying loud noise.

A protection stop feature is added in this product that automatically turns on itself and this wood chipper is ETL approved for light-duty jobs of recycling and waste management at home. A full 2-year warranty is offered to customers for its durable and effective working assurance.

Pros Cons
4300 revolutions per minute are allowed Price
1.5inch material diameter processing ability
2-year warranty for best working assurance to users

Conclusion: 

The motor allows 4300 revolutions per minute with 15amp electric current consumption. The reduction ability is up to 1\17 of its original size. No fumes or smoke is produced and it is ETL approved for its best workability.

A 2-year warranty is another plus of this gadget. The material size for processing is up to 1.5inches and a safety stop feature is also involved.

 

 

Sun Joe CJ603E Wood Chipper/Shredder

Sun Joe CJ603E Wood Chipper

Snow joe manufactured CJ603E model of wood chipper or shredder for mulching the garden debris for recycling and waste management.

With a 15amp electric motor, the CJ603E is perfect for chopping the leaves, twigs, brushes, and branches into nutrient-rich mulch for reuse. 1.73inch material diameter processing ability of the debris shredder has made it the perfect choice for customers who intend to use it at home.

The reduction ratio of 21:1 will make your yard look very beautiful and a thing to envy for your neighborhood. Easy to assemble and virtually maintenance-free, this powerful electric wood chipper is ready to use every time you need it and with its built-in safety stop, it automatically engages when the hopper is opened.

It ensures ease and high-end workability to its users with its advanced and customer’s friendly features. The no-smoke operation with zero emissions for cleaner air makes it environment friendly and the silent working ability provides another level of satisfaction.

Pros Cons
1.73inch material diameter handling ability Not suitable for heavy-duty jobs
Zero carbon emissions and no-smoke production
Silent operation

Conclusion: 

Materials like leaves, branches, twigs, and so on, having a diameter up to 1.73inches can be processed with this wonderful wood chipping\shredding machine. 21; 1 reduction ratio is another plus point of this product.

For environment protection, zero carbon emission, and no-smoke production along with a silent operation feature, they are just perfect for home users. 15amp electric motor saves a lot of money going into electricity bills.

 

 

Landworks Wood Chipper Shredder Mulcher

Landworks Wood Chipper Shredder Mulcher

This excellent chipper shredder is the brilliant one in the market that acts as the giant feeder and hopper in demand. With this machine, you can feed up to almost 3-inch limbs or any other residue without any hassle. It does not bring any unwanted or clogging results. Hence, it is included with the 7HP motor at the 212cc of displacement.

Another best thing about this wood shredder has been its superior steel construction which makes it reliable and long-lasting to use. It is the best recommendation for you to have a shedder by your side which does not break or corrode at any moment.

Through the 10-inch wheels made out of rubber, you can expect to have an ultra-smooth experience on any surface. It is not just powerful in its functions but is equally portable too for easy transportation. Hence, it is an entirely safe product that even a beginner can use without any tutorial need.

The shredder has a reliable on/off button with an automatic shut-off system to keep the engine safe. You won’t be facing any issues when operating the shredder due to its compact, convenient, and lightweight nature.

It has larger wheels that can be used on any surface with greater ease. This gets even easier for you to transport it from one place to another one.

We won’t call it the most powerful one, but it is not the weakest one. It grants you powerful and top-notch performance with the 212cc engine. You will be impressed with its practical and fast performance for sure.

Talking about the construction, it is made up of a reliable steel body, a rubber wheel, and a resilient engine. Its time make your garden shredding task a bit easier with this machine right now!

Pros Cons
Powerful in chipping and shredding Very noisy
Easy to move around & transport
Straightforward in design
Heavy-duty steel durable construction

Conclusion:

Well, if you want a commercial wood chipper, then having this great Land work wood chipper is a convenient option to pick right now. It is not just powerful in its functions but is equally portable too for easy transportation.

 

 

Final Verdict:

Cleaning up gardens and backyards needs reliable and efficient chipping\shredding machinery for green recycling and waste management. As the mulch created can be reused to nourish the large trees and flower beds.

Get yourself a durable and effective chipping machine but to do so, always do a little research about the latest features in the market. Determine your needs and budget, compare various seemingly-good options, and then decide a product that fits best with you. Also, consider the given products in this article, buy one for yourself, and enjoy the cleaning and maintenance of your yard.

 

Recommended Readings (Rated Recommendation)

Leave a Reply

Your email address will not be published. Required fields are marked *